Sheen Polish for burnished Floors.
CONQOR CRETEPOLISH: Mop-on concrete floor polish with a stain blocker
What is CRETEPOLISH?
CONQOR CRETEPOLISH - Sheen Polish for Burnished Concrete Floors
CONQOR CRETEPOLISH is a water-based synthetic polymer concrete floor polish with a stain blocking additive.
CRETEPOLISH, the next generation, water-based, metal cross-linked, concentrated, synthetic polymer polish for initial sheen enhancement.
CONQOR CRETEPOLISH is ideal for AQURON 2000 or AQURON 1000 treated surfaces.
CONQOR CRETEPOLISH is a key part of the SLAB-TECT® system.
- SURFACE FINISHER
- SHEEN ENHANCING POLISH
WHAT WILL THIS PRODUCT DO FOR YOUR PROJECT?
CONQOR CRETEPOLISH provides sheen, stain resistance and cleanability to exposed concrete floors. It can be used in conjunction with hydrogel treatments.
CONQOR CRETEPOLISH
SURFACE FINISHER for BURNISHED FLOORS
Provides sheen, stain resistance and cleanability. CONQOR CRETEPOLISH is designed for interior, power trowel finished concrete floor surfaces, where sheen enhancement is desired. For example wholesale and retail warehouse floors, and other floors that require an easy to clean surface.
CONQOR CRETEPOLISH can also be utilised over acrylic, epoxy and polyurethane sealed floors, to increase or restore sheen, Always ensure a trial area is completed first to ensure compatibility.
CAUTION: CRETEPOLISH must be applied when ambient temperatures of area to be treated is above 10 degrees Celsius. Cold temperature will effect the water-based synthetic polymer.
CONQOR CRETEPOLISH
ENHANCED SHEEN LEVELS for BURNISHED FLOORS
- Typically, imparts improved sheen levels (depending on surface finish).
- Provides sheen enhancement even without buffing.
- Scuff and scratch resistant.
- Retains sheen enhancement with scrub cleaning procedures.
- Rejuvenates with dry buffing.
CAUTION: CRETEPOLISH must be applied when ambient temperatures of area to be treated is above 10 degrees Celsius. Cold temperature will effect the water-based synthetic polymer.
CONQOR CRETEPOLISH
ECONOMICAL & EASY to APPLY
- CRETEPOLISH is very cost effective.
- Easy to apply and re-apply.
- Safe to use – water based, low odour, no fumes.
- Economical, dilutes with water
CAUTION: CRETEPOLISH must be applied when ambient temperatures of area to be treated is above 10 degrees Celsius. Cold temperature will effect the water-based synthetic polymer.
HOW CONQOR CRETEPOLISH WORKS.
What good looks like?
Check out short video below of CRETEPOLISH being applied. Easy to apply.
CONQOR CRETEPOLISH
being applied to BURNISHED FINISH CONCRETE
Safe to use – water based, low odour, no fumes.
CAUTION: CRETEPOLISH must be applied when ambient temperatures of area to be treated is above 10 degrees Celsius. Cold temperature will effect the water-based synthetic polymer.
CONQOR CRETEPOLISH
helps SLIP RESISTANCE on Burnished Floors
Watch Video: “See & hear” the difference with and without CONQOR CRETEPOLISH
The small molecular size of CONQOR CRETEPOLISH allows superior penetration into concrete surfaces and provides a hardened sheen which will not flake or peel.
CONQOR CRETEPOLISH is formulated for interior burnished floor. CONQOR CRETEPOLISH will not reduce slip resistance i.e “will not make the burnished surface more slippery”
CONQOR CRETEPOLISH Details.
A water-based synthetic polymer concrete floor polish with a stain blocking additive. Technical data is available on our Downloads page
CONQOR CRETEPOLISH is a key part of the SLAB-TECT® system.
NEED MORE
PRODUCT INFO?
All the details you need – download a PDF copy of the product information sheet.
Do you have a project to quote?
Or need some help specifying our products? Let us know the details of your next project and we’ll get in touch.