Concrete Curing & Surface Durability.
AQURON 1000 – Spray-on internal curing, anti-dusting & hardener.
What is AQURON 1000
AQURON 1000 is a spray-applied colloidal silica hydrogel concrete treatment to increase durability for new and existing concrete.
AQURON 1000 concrete sealer is our most popular concrete surface durability treatment for exposed concrete floor slabs. AQURON 1000 provides enhanced concrete curing and permanent porosity sealing. Its deep penetrating hardening provides excellent long-term durability under load and traffic stresses.
This treatment enhances the service life of concrete floors in factories, warehouses and data centres. It plays a key role in substrate preparation for the sheen of retail floors.
Environmental Product Declaration (EPD) available.
MARKHAM offer AQURON 1000 by one of following options:
- PRODUCT SUPPLY 20L or 1000L with Limited Product warranty
- PROJECT SUPPLY based on total m2’s, training & Warranty Options
- TECT SYSTEMS Supply, installed with Performance Warranty
- Provides excellent concrete curing quality
- Penetrates deeply for long-term durability
Environmental Product Declaration (EPD)
AQURON 1000 SPRAY-ON holds an independently verified and registered EPD, confirming its environmental credentials for use in sustainable construction projects across the UK.
How does this product help your project?
AQURON 1000 is curing assistance & permanent concrete hardener, anti-dusting surface durability treatment, replacing multiple treatments.
AQURON 1000 has proven track record protecting structures for over 30yrs.
AQURON 1000 SPRAY-ON
Ultimate for burnished concrete floor slabs
AQURON 1000 penetrating hydrogel is a spray-applied. The sprayer must have sufficient pressure and tip size to atomise the spray. AQURON 1000 can be applied to new or existing concrete.
- Applied over a number of passes
- Coverage rate of about 6-10 m² per litre, depending on the absorbency of the concrete.
- MARKHAM recommends applying AQURON 1000 to concrete during the curing stage, for enhanced curing and maximum long-term benefit.
- Nil VOC content = 100 % Safe for installers, marine and animal life
- MARKHAM recommends applying AQURON 1000 to concrete during the curing stage, for enhanced curing and maximum long-term benefit. AQURON must by applied within 24hrs of concrete pours to provide curing assistance. If applied later, the other benefits of AQURON will be achieved.
AQURON 1000 SPRAY-ON
Internal Durability, Hardening & Anti-Dusting
- Chaplin abrasion tests show a clear reduction on the total of wear (approximately 40% less abrasion) in AQURON 1000 treated concrete. Lasts longer in harsh conditions.
- Adhesion dust tests show a significant reduction in surface loss (approximately 30% less) in AQURON 1000 treated concrete.
- Permanent protection of the surface and concrete to provide anti-dusting and an easy-care concrete surface.
- MARKHAM recommends applying AQURON 1000 to concrete during the curing stage, for enhanced curing and maximum long-term benefit.AQURON must by applied within 24hrs of concrete pours to provide curing assistance. If applied later, the other benefits of AQURON will be achieved.
AQURON 1000 SPRAY-ON
Concrete Curing equal to water curing
- Equal or superior to 14 days’ water curing.
- Meets the moisture retention requirements of AS3799.
- A quicker, easier system to utilise and stay ahead of construction programmes.
- Reduces drying shrinkage cracking and slab curl. Resulting in increased durability from day one.
AQURON 1000 SPRAY-ON
After years of service
AQURON spray-on hydrogel concrete treatment can preserve a non-slip broom surface finish even under heavy traffic conditions, without ever needing reapplication. The more you use it the better it gets!
This basement parking building still retains its non-slip seal after years of use. Check out the broom marks at the end of this video.
How AQURON 1000 works.
AQURON 1000 concrete sealer can be applied to new or existing concrete.
MARKHAM recommends applying AQURON 1000 to concrete during the curing stage, for enhanced curing and maximum long-term benefit.
AQURON 1000 SPRAY-ON
Applied over a number of passes
AQURON 1000 penetrating hydrogel is a spray-applied. The sprayer must have sufficient pressure and tip size to atomise the spray. AQURON 1000 can be applied to new or existing concrete.
- Applied over a number of passes
- Coverage rate of about 6-10 m² per litre, depending on the absorbency of the concrete.
- MARKHAM recommends applying AQURON 1000 to concrete during the curing stage, for enhanced curing and maximum long-term benefit.
- Nil VOC content = 100 % Safe for installers, marine and animal life
- MARKHAM recommends applying AQURON 1000 to concrete during the curing stage, for enhanced curing and maximum long-term benefit. AQURON must by applied within 24hrs of concrete pours to provide curing assistance. If applied later, the other benefits of AQURON will be achieved.
AQURON 1000 SPRAY-ON
SUITABLE FOR BROOMED FINISHED SURFACES
- AQURON 1000 concrete sealer can be applied to new or existing concrete.
- Adhesion dust tests show a significant reduction in surface loss (approximately 30% less) in AQURON 1000 treated concrete.
- Permanent protection of the surface and concrete to provide anti-dusting and an easy-care concrete surface.
- MARKHAM recommends applying AQURON 1000 to concrete during the curing stage, for enhanced curing and maximum long-term benefit.
AQURON must by applied within 24hrs of concrete pours to provide curing assistance. If applied later, the other benefits of AQURON will be achieved.
AQURON 1000 SPRAY-ON
Being applied to vertical & Overhead Soffits
AQURON 1000 penetrating hydrogel is a spray-applied. The sprayer must have sufficient pressure and tip size to atomise the spray. AQURON 1000 can be applied to new or existing concrete.
- Applied over a number of passes
- Coverage rate of about 6-10 m² per litre, depending on the absorbency of the concrete.
- MARKHAM recommends applying AQURON 1000 to concrete during the curing stage, for enhanced curing and maximum long-term benefit.
- Nil VOC content = 100 % Safe for installers, marine and animal life
AQURON 1000 SPRAY-ON
Safe for both CONTRACTOR and ENVIRONMENT
AQURON 1000 penetrating hydrogel is a spray-applied. The sprayer must have sufficient pressure and tip size to atomise the spray. AQURON 1000 can be applied to new or existing concrete.
- Nil VOC content = 100 % Safe for installers, marine and animal life
- Environmental Product Declaration (EPD) available.
AQURON 1000 SPRAY-ON
MARKHAM offer END-to-END Installs
MARKHAM offer AQURON 1000 by one of following options:
- PRODUCT SUPPLY 20L or 1000L with Limited Product warranty
- PROJECT SUPPLY based on total m2’s, training & Warranty Options
- TECT SYSTEMS Supply, installed with Performance Warranty
Previous AQURON 1000 SPRAY-ON projects.
AQURON 1000 is one of our most popular concrete treatments and has been applied to thousands of projects across.
AQURON 1000 SPRAY-ON Details.
MARKHAM offer AQURON 1000 by one of following options:
- PRODUCT SUPPLY 20L or 1000L with Limited Product warranty
- PROJECT SUPPLY based on total m2’s, training & Warranty Options
- TECT SYSTEMS Supply, installed with Performance Warranty
NEED MORE
PRODUCT INFO?
All the details you need – download a PDF copy of the product information sheet.
Do you have a project to quote?
Or need some help specifying our products? Let us know the details of your next project and we’ll get in touch.