SUSTAINABLE CONCRETE WATERPROOFING ADMIXTURE

AQURON 300 - Advanced colloidal silica hydrogel admixture for waterproofing concrete - enhances strengths, improves workability & assists long-term durability.

SUSTAINABLE CONCRETE WATERPROOFING ADMIXTURE

AQURON 300 - Advanced colloidal silica hydrogel admixture for waterproofing concrete - enhances strengths, improves workability & assists long-term durability.

Concrete Admixture Icon
AQURON 300 is an advanced integral concrete waterproofing admixture.

AQURON 300 is an environmentally friendly, liquid concrete additive which provides integral waterproofing and corrosion protection for your peace of mind while also enhancing workability for a better placement experience.

WATERPROOFING

The solidified hydrogel throughout the concrete effectively prevents all ingress and migration of moisture and corrosives. It is an industry-accepted fact that moisture causes problems in concrete as it provides a transport system for corrosives to reach the reinforcing steel and cause rusting. This leads to unsightly staining, cracking, pop-outs and in the long term, a hazardous structure needing costly repairs. By immobilising moisture and closing concrete bleed porosities, AQURON 300 provides longterm waterproofing, protection and durability.

BENEFITS DURING CONSTRUCTION

During the batching, placement and curing stages, AQURON 300 thoroughly saturates every cement particle and retains the vital moisture for hydration in a hydrogel. This promotes a uniform and controlled hydration which is proven to reduce shrinkage and cracking by between 20 and 35% (depending on the mix) when compared to standard concrete. Working time and other critical fresh concrete properties are not adversely affected when using AQURON 300, meaning no changes to standard mix designs is needed.
AQURON 300 enhances rheology, making it useful for awkward placements and pumping into small cavities where higher slump is required with minimised strength losses.

LONG-TERM BENEFITS

AQURON 300 will self-heal non-moving cracks up to 0.5mm. AQURON 300 is fully compatible with any paint, coating or adhesive designed for bare concrete; it does not introduce any element not already found within the concrete. The hydrogel is maintained for the design life of the concrete, you cannot remove or reverse the chemical reaction that forms the hydrogel.

Concrete Admixture Icon

Why your concrete structure needs AQURON 300

AQURON 300 is an advanced concrete waterproofing admixture with many direct and indirect benefits.

AQURON 300

WATERPROOFING AND DURABILITY

The solidified hydrogel throughout the concrete effectively prevents all ingress and migration of moisture and corrosives. It is an industry-accepted fact that moisture causes problems in concrete as it provides a transport system for corrosives to reach the reinforcing steel and cause rusting. This leads to unsightly staining, cracking, pop-outs and in the long term, a hazardous structure needing costly repairs.

By immobilising moisture and closing concrete bleed porosities, AQURON 300 concrete waterproofing admixture provides longterm waterproofing, protection and durability.

AQURON 300

BENEFITS DURING CONSTRUCTION

During the batching, placement and curing stages, AQURON 300 thoroughly saturates every cement particle and retains the vital moisture for hydration in a hydrogel. This promotes a uniform and controlled hydration which is proven to reduce shrinkage and cracking by between 20 and 35% (depending on the mix) when compared to standard concrete.

Working time and other critical fresh concrete properties are not adversely affected when using AQURON 300, meaning no changes to standard mix designs is needed.

AQURON 300 enhances rheology and mix workability, making it useful for awkward placements and pumping into small cavities where a higher slump is required with minimized strength losses.

AQURON 300

CERTIFICATION

  • Licensed to use the Environmental Choice New Zealand envirolabel
  • Nil VOC
  • Suitable for potable water
  • Compliant with AS 1478

AQURON 300

WATERPROOFING AND DURABILITY

The solidified hydrogel throughout the concrete effectively prevents all ingress and migration of moisture and corrosives. It is an industry-accepted fact that moisture causes problems in concrete as it provides a transport system for corrosives to reach the reinforcing steel and cause rusting. This leads to unsightly staining, cracking, pop-outs and in the long term, a hazardous structure needing costly repairs.

By immobilising moisture and closing concrete bleed porosities, AQURON 300 concrete waterproofing admixture provides longterm waterproofing, protection and durability.

AQURON 300

BENEFITS DURING CONSTRUCTION

During the batching, placement and curing stages, AQURON 300 thoroughly saturates every cement particle and retains the vital moisture for hydration in a hydrogel. This promotes a uniform and controlled hydration which is proven to reduce shrinkage and cracking by between 20 and 35% (depending on the mix) when compared to standard concrete.

Working time and other critical fresh concrete properties are not adversely affected when using AQURON 300, meaning no changes to standard mix designs is needed.

AQURON 300 enhances rheology and mix workability, making it useful for awkward placements and pumping into small cavities where a higher slump is required with minimized strength losses.

AQURON 300

CERTIFICATION

  • Licensed to use the Environmental Choice New Zealand envirolabel
  • Nil VOC
  • Suitable for potable water
  • Compliant with AS 1478

How AQURON 300 works.

The basics of the technology is colloidal silica hydrogels. Colloidal silica hydrogels are nano-size and able to work in the nano-size concrete pores. On average a typical concrete pore is around 50 nano meters, and colloidal silica is in the range of 5-20 nano meters in size. To give scale, a human hair is 100,000 nano metres.

BHP Kalgoorlie Concentrator Shed
Glencore Murrin Murrin Nickel-Cobalt Processing Plant
Mount Ida Lithium Processing Plant
Prologis DIRFT3 Multi-Storey Car Park
St Mark's Apartments
Rush Wall Wind Turbine Bases
Luton Airport Terminal 2 Carpark
Accolade Wines Wind Turbine
Carey Grammar School
Ports of Auckland Bledisloe Car Park
Len Lye Centre
Project Gemini Data Centre
Cronulla Seawall
Portrait Carnegie
Albany Stadium Pool

Previous AQURON 300 projects.

AQURON 300 has been used extensively throughout Australasia.

BHP Kalgoorlie Concentrator Shed
Glencore Murrin Murrin Nickel-Cobalt Processing Plant
Mount Ida Lithium Processing Plant

More concrete projects.

St Mark's Apartments
Rush Wall Wind Turbine Bases
Luton Airport Terminal 2 Carpark
Accolade Wines Wind Turbine
Carey Grammar School
Ports of Auckland Bledisloe Car Park
Len Lye Centre
Project Gemini Data Centre
Cronulla Seawall
Portrait Carnegie
Albany Stadium Pool

AQURON 300 Details.

We are different in our approach.

AQURON 300 Concrete Waterproofing Admixture is supplied to suit the cubic meterage of the mix, based on the requirements of the mix design. AQURON 300 is available to readymix plants in either 20 litre drums (minimum order quantity) or 1000 litre IBC totes.

This approach ensures your specific project gets the correct treatment and ensures effective quality control.

Detailed information is found on our downloads page! Technical data, MSDS, specifications, BIM files and more.

NEED MORE
PRODUCT INFO?

All the details you need – download a PDF copy of the product information sheet.

Do you have a project to quote?

Or need some help specifying our products? Let us know the details of your next project and we’ll get in touch.

Let us keep you Updated.

Subscribe to our ON.CRETE. updates to receive our latest content, plus news and views from the world of concrete.

Scroll to Top

Saving the world, one concrete structure at a time.