Highways, Bridges, and Caring for Concrete

Enhance durability and extend service life

It’s Costly to Maintain Concrete Infrastructure

If you’re in charge of the care of civil road or bridge infrastructure (or the related repair budget) you’ll be well aware maintenance does not come cheap; to say nothing of the cost of replacements!
 
There are two real-world factors that come into play here:
1) Maintenance budgets are likely to be inadequate to cover the real costs involved.
2) Service life estimates are rarely achieved without maintenance intervention along the way.
And do you know what? This shouldn’t be the case. Isn’t concrete naturally durable?
 

Moisture and Deterioration

Did you know that premature deterioration of concrete is almost always the result of moisture-borne contamination?
Reactive substances enter the concrete and move about within it, carried by water and moisture vapour. These include chlorides and other substances that react with the concrete or the reinforcing steel, setting up a cycle of cracking and breakdown.
Think about it: structures in extremely dry conditions will tend to last a lot longer. Conversely, structures in moist conditions are under environmental pressures that lead to premature decay.
 
This at once places watercourse bridges, permanently subjected to a high-moisture environment, at particular risk. Roads and highways, with their weather exposure and traffic stresses, are not far behind.
 

Markham UK Project - Spey Bridge - Scotland
This vintage bridge over the Spey River was treated by MARKHAM to enhance its durability.

 

Prevention … and the Trouble with Cracks

All of this is probably not telling you anything you didn’t already know, really. And of course, a lot of effort is constantly going into research for better mix designs and work practices which should make concrete structures more durable from the outset.
The tiny problem is, it’s virtually impossible to eliminate micro-cracking during construction – and micro-cracks are gateways for moisture – and moisture carries contamination.
Adding life to concrete.
Further, if the structure you’re caring for has aged, and you’re already faced with cracking (and/or steel corrosion), then you need a cost-effective solution urgently.
You may be thinking of preventing further deterioration by means of a coating or silane.
You may be planning on cementitious patching or other repairs.
Unfortunately, none of these things will address or arrest the underlying problems.
 

Enter – Hydrogel Treatments

Aquron concrete hydrogel treatments are water-based nanoparticle catalytic silica colloids.
Yes, that’s quite a mouthful, but what do they really do?
Aquron treatments penetrate the porosity of the concrete, utilizing the free lime to form a hydrogel within the matrix.
 
Importantly, this hydrogel uses up and immobilizes the moisture within the concrete. This has two key effects:
1) Prevents moisture (… and those moisture-borne contaminants …) from entering the concrete.
2) Prevents the movement of moisture within the concrete – arresting the reactivity of the contaminants.
 
The practical results of this include

  • Arresting ASR (alkali silica reactivity)
  • Preventing DEF (delayed ettringite formation)
  • Arresting corrosion, and protecting the reinforcing zone
  • Sealing micro-cracks up to 0.5mm

 
Aquron protected
 
You can see where this is going. Yes, there is a cost-effective treatment for proactive maintenance of your concrete infrastructure.
 
IF INCLUDED IN NEW CONSTRUCTION – Aquron hydrogel treatments can enhance curing, minimize cracking, and protect the durability of the structure from the outset.
IF USED FOR REMEDIATION – Aquron hydrogel treatments can penetrate deep into the concrete, sealing against further contamination, and arresting existing reactivity.
 
If your damage is extensive (spalling or major cracking) then Aquron alone will not suffice, but can still be beneficial in preventing Incipient Anode Formation around cementitious repairs.
 

Major Cost Savings Over Time

Proactive concrete maintenance, using Aquron hydrogel treatments, will significantly assist in reducing major repair costs. Intervene early with hydrogel treatments, to save major repair costs over time.
 
Want to know more? Get in touch!
 

… and There’s More …

Hey – Aquron hydrogel treatments are environmentally friendly too. That’s important when you’re working over waterways, and other sensitive areas.


Photo by Wayne Jackson on Unsplash

Let us keep you Updated.

Subscribe to our ON.CRETE. updates to receive our latest content, plus news and views from the world of concrete.

Scroll to Top